Servicing Gas Appliances
& more
1
Furnaces
Gas Heaters
With Cold winters Servicing Furnaces in Fall or Spring can help reduce strain in busy winter months.
Heat Exchanger Inspection
Chimney Inspection
Preemptive Component Repair Ex.(Thermocouple, HSI)
2
Hydronic Heating
(Infloor heat)
Upgrading from Open loop from Closed loop is recommended.
Black Iron pipe should be removed.
Pumps and zone valves are common components to fail.
Good maintenance means Good Efficiency.
3
Boilers
Combi Unit
Wall Mount
High Mass
Statistically poor maintenance and operation cause approximately two thirds of all boiler failures and unscheduled shutdowns.
If a leak occurs getting it addressed early can stop bigger problems and other component failure.
4
Continuous
Water Heater
Continuous water heaters require descaling ( depending on water quality)
Scaling will cause efficiency lost.
Flame sensors, Hot surface Ignitors and sparker require maintenance.
5
Water Heaters
Water Heaters usually require little maintenance.
Hard water can cause build up in tanks making it sound like rocks are in the tank when firing.
Water Heaters have a sacrificial anode that protect it from corrosion.
Maintenance depends on water quality.
6
Water Treatment
Water Testing will be require to determine appropriate Water Treatment Equipment.
Water Sample Bottles are free; they test Hardness, Iron concentration, Manganese, Total dissolved solids and PH.
Onsite Water Analysis test for; Hardness, Iron, PH and Chlorine.
Laboratory Analysis (Extra cost)
test for; Chemical and Bacterial and special requests for other material.
7
Humidifiers
Keeping the air in your home from becoming too dry may help with many of these health issues. Depending on where you live, controlling indoor humidity is not always easy. It is best to keep your home’s humidity within an optimal range–not too high and not too low. The Environmental Protection Agency (EPA) recommends that you keep the air in your home between 30 and 50 percent humidity.
When / Why
If you have doubts we have affordable inspections and can set up maintenance plans to help educate client's of expected costs of Mechanical Repairs / Maintenance.
Plumbing to Heating we can help prioritize what should be fixed, to attended next: knowing time frames on component failure to better budget for the future.
We will always lay out and look at the best options for the client's.